Categories

Manufacturers

EBS Breeding Mount

The Equine Breeding Supply Stallion Breeding Mount is the finest collection phantom in the industry. 

More details


$3,295.95




This patented mount is durable, adjustable, and with a trained stallion it can be a one-person operation!  Our flexible design give the breeder options for collecting the stallion with either an A.V. built into the mount itself or via side collection.  It's a mount that was designed by breeders for breeders, and with adjustments and enhancements over the years has been the premier mount on the market.  The mount also includes a complete Colorado-style artificial equine vagina assembly with the liners and accessories in either 18", 22"(standard) or 25" sizes.  The mount also includes an instructional DVD created by it's inventor the late dr. Jack Dyer.  The video presentation demonstrates proper setup of the artficial vagina as well as collection of the stallion using the EBS mount.  Wehn used properly this mount is a highly effective and very safe method of collecting stallion. The support post options for the EBS Mount are manufactured from schedule #80 steel.  This heavy duty assembly is strong enough to support anything from pony to an aggressive draft horse.  The thick steel, strong welds and powdercoated finish will offer you many years of continued use and abuse.  The standard covering fabric on the mount body itself is a ballistic rip-stop material that won't easily punture or tear.  The interior frame of the mount body is welded steel diamond grill mounted on a welded steel framework.  The dense-cell foam padding between the frame and covering is designed not to crumble or collapse with age.  Collect any size stallion with one mount.  With both height and angle adjustments you can set this mount up to collect stallions large and small.  With our new built-in crank-style jack option, height adjustments ar a one-person operation!  No need for a seperate floor jack.  Collect the stallion via the built in Colorado A.V. or put the optional removable padded door plug in and collect a stallion 'hand held' from the side with either the included Colorado-style A.V. or a Missouri-style.  The three support pipe options also permit the installation of this mount in either a new or existing facility.  Do you have a stallion that likes to hold on via a bit?  Belt on the optional Stallion Leather Grab and your horse can hold on and bite away.  If you have an animal that grips tightly to the sides of the mount with his forelegs, chafing can occur.  The optional Softside Fleece Cover straps over the rear 2/3 of the mount to provide protection for inner knee area.  Does your stallion like to hook his forelegs onto something for purchase?  The buckle-on Hip Assembly offers the stallion a set of hips to hold onto during collection to help keep him in place.  The EBS Mount uses a single support post for its operation.  Since different breeding farms have different architecture and differing needs, we offer three styles of support base to make installaiton convenient for everyone.  The support pipe is a seperate component from the main mount for this reason.  All support pipe options are constructed of schedule #80 steel.  Permanent Support Pipe is for the breeder that is setting up a new breeding station with the ability to pour a concrete base for the mount.  This is a single-pipe design where once in place, the support pipe will stay assembled for the life of the mount with approximately 30" of its over 6 foot length extending above the concrete surface.  The in-ground section also has a stabilizing bar to increase durability.  The above ground portion has the pre-drilled holes to accommodate the main mount section and the entire post is powdercoated for long life.  The Removable Support Pipe is the most popular of the support pipe options.  It is also designed for the breeder that is setting up a new breeding station with the ability to pour concrete base for the mount.  This is a dual-pipe design.  It is very much like the Permanent Support pipe, but it is constructed of two pieces that bolt together at ground level with a flange assembly.  This allows removal of the upper section, so during off-season time, the mount can be removed completely.  If the mount ever needs to be moved at a later time, a new 'in-ground' section can be purchased and no cutting would be required to remove the post.  The in-ground section also has a stabilizing bar to increase durability.  The above ground portion has the pre-drilled holes to accommodate the main mount section and the entire post is powdercoated for long life.  The Concrete Mount Support Pipe is for the breeder that has an existing concrete floor that they need to mount the unit to it.  Sometimes it is not feasible to pour concrete.  This design uses an extra-wide 14" flange floor plate that can be secured to the concrete floor plate with 6 masonry bolts (not included).  This support pipe also has the pre-drilled hosles to accommodate  the main mount section and the entire post is powdercoated for long life.  We offer these tailored-for-our mount support pipes to make installation as painless as possible.  If you have the ability to build your own support pipe structure for the EBS mount we'll give you the specs to make it work.  Most find that purchasing a ready-to install support pipe from us is the easiest safest route.  It is not required however! The equine breeding supply vet chute is an ideal device for the temporary holding of a horse to perform artificial  insemination work or perform examinations.  The vet chute surrounds the animal, preventing most movement.  It is constructed of schedule #80 steel pipes  forming a rectangular box(inner diameter:76"Lx30"Wx84"H).  The 2-rung gates along the four sides are all functional doors , so access is very versatile.  The chute has  a frame around the top that allows such mechanics.  The front and rear doors also have a solid panel to protect people from kicking or rearing.  The front door is postitioned slightly higher to prevent horse from attempting to jump out.  The four legs have predrilled holes for mounting to concrete surface, and the entire unit is powdercoated for a long life.  The vet chute can also be used as a teaser chute for holding a mare in heat in conjunction with the breeding mount.  The Vet Chute and the EBS Breeding Mounts require shipment by semi-truck.  The mount is strapped to a shipping pallet, so the receiver must hav ethe ability to retrieve a pallet from a truck trailer. Call for quote on freight.

Cart  

No products


Total $0.00

Cart Check out









Newsletter

facebooktwittergooglepinterest
Competitive Prices
Gallery Showcase